The effects of drilling parameters on thrust force, temperature and hole quality of glass fiber reinforced polymer composites

Basit Öğe Kaydı
dc.authoridEbru Günister / 0000-0002-7797-604X
dc.contributor.authorMalik, Khurshid
dc.contributor.authorAhmad, Faiz
dc.contributor.authorTze Keong, Woo
dc.contributor.authorGünister, Ebru
dc.date.accessioned2022-10-03T11:48:31Z
dc.date.available2022-10-03T11:48:31Z
dc.date.issued2022
dc.departmentFakülteler, Diş Hekimliği Fakültesi, Temel Bilimler Bölümü
dc.description.abstractThis paper presents an investigation of the drilling performance of glass fiber reinforced polymer (GFRP) composite based on the thrust force, temperature, and delamination factor (at entry and exit of the hole). High-speed steel (HSS), solid carbide (SC), and solid carbide Balinit® Helica coated (SCBH) twist tools were used for the drilling process. Other drilling parameters were high spindle speeds (12,000, 15,000, and 18,000 rpm), feed rate (300, 500, and 700 mm/min), and laminate thickness (3, 5, and 7 mm). ANOVA and response surface methodology were developed to examine the drilling process based on input and output parameters. Results showed that delamination was observed in the form of matrix debonding, uncut fibers, and fiber pull-out. The best drilling performance was achieved by the SC and SCBH tool at a low feed rate (300 rpm) and high speed (18,000 rpm), and high laminate thickness (7 mm).
dc.identifier.citationMalik, K., Ahmad, F., Keong, W. T., & Gunister, E. (2022). The effects of drilling parameters on thrust force, temperature and hole quality of glass fiber reinforced polymer composites. Polymers and Polymer Composites, 30, 096739112211311. https://doi.org/10.1177/09673911221131113en_US
dc.identifier.doi10.1177/09673911221131113
dc.identifier.endpage19
dc.identifier.issn0967-3911
dc.identifier.issn1478-2391
dc.identifier.scopus2-s2.0-85139010077
dc.identifier.scopusqualityQ3
dc.identifier.startpage1
dc.identifier.urihttp://dx.doi.org/0000-0002-7797-604X
dc.identifier.urihttps://hdl.handle.net/20.500.12941/92
dc.identifier.volume30
dc.identifier.wosWOS:000864131200001
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorGünister, Ebru
dc.language.isoen
dc.publisherSage Journals
dc.relation.ispartofPolymers and Polymer Composites
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectpolymer composites
dc.subjectglass fiber reinforced polymer
dc.subjectdrilling
dc.subjectdrilling properties
dc.subjectANOVA/RSM
dc.titleThe effects of drilling parameters on thrust force, temperature and hole quality of glass fiber reinforced polymer composites
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Ebru Gunister_The effects of drilling parameters.pdf
Boyut:
3.15 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Temel Bilimler Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu